I get noise on my car audio system, that will only disable when I turn off the car. What could be the cause.
OEM Interface Forum » CD Mechanism Switchers
Noisy Audio System
(8 posts)-
Posted 2 years ago
-
This noise could be picked up through power connection, from either the alternator, or ignition.
Posted 2 years ago # -
I would suggest you install a 12 volt noise filter between the power tap, and power input on your car audio.
Posted 2 years ago # -
The sound distorts when I play high volume, in the car system
Posted 2 years ago # -
@Jroberts, I think the radio wattage is too low, to drive the speakers. You can try use a car amplifier, to increase the radio's power.
Posted 2 years ago # -
I lost my station memories in my car radio, when I turned the car off. What could be the cause?
Posted 2 years ago # -
@RyanF, I think the tuner wire is not connected properly. You need to connect the yellow wire to your vehicle's positive terminal or to a fuse.
Posted 2 years ago # -
I'd be tempted to try and shield the M-Audio 1010 card, and/or change the pci slot if it helps distance it. Or if it's the proximity of the PSU - shield that.
The noise source tho could be a handful of things that u would have to deduce from a process of elimination.
If it's just a workstation, u may consider putting a weaker gfxcard in there. I found them to emit quite a bit. Find something that's silly-cheap, I mean u can get £10 pcie cards if u look long enough - they'll just display.
Posted 2 years ago #
Reply
You must log in to post.