Okayheres the problem my head unit is a 200w (50w per channel at 4 channels) which is only pushing my 4 front tweeters (only 2 channels im using on those cuz they are still stock). My Amplifier is 1000w 4 channel (250w per channel) which is handling 4 speakers.. 2 front door and 2 rear. The front door is 350w each and the rear is 700w each. At first the Head unit was turning off when i took the volume up to 8 but my volume goes up to 30MAX, that was happening because my battery was dying and the engine wasn't running. I jumped the battery and had the car running.. the Head unit stays on but now the amplifier goes off when the volume goes to 10 What could be the problem??
OEM Interface Forum » Amplifiers, Speakers & Subwoofers
amplifier cuts off with high volume
(2 posts)-
Posted 2 years ago
-
Your problem is most likely any or all of the following: system voltage dropping too low, loudspeaker impedance is too low, amplifier gain is too high. When the amps turn off, what is your system voltage? What is the load on your amp? Your gain is probably not set correctly, but you need to answer those questions first...
Posted 2 years ago #
Reply
You must log in to post.